InCall Lock, created by vangrieg, will temporarily disable Send (aka Talk, Green) and End (aka Red) hardware buttons when you receive an incoming call in order to prevent accidental call pickups/rejects while you are pulling your device out of your pocket. All other hardware buttons are untouched. After you answer/reject your call the application will release the buttons, so you will be able to hang up, put calls on hold etc. using hardware buttons normally. The application, after being launched, will remain resident in memory but will not use any CPU cycles at all as it relies on WM Notification system and doesn’t do any polling. As it is using WM internal event system, it should work regardless of OS language, installed dialer etc.

How to use:

* Install cab
* Soft reset or launch “InCall Lock Toggle”
* To enable/disable InCall Lock temporarily, use InCall Lock Toggle in your Programs menu.
* To disable it permanently, just uninstall via Settings – Remove Programs

Download this application

Locking your device has been a must have feature of any mobile device. Its important just to avoid any incidence of accidental calling & receiving as well. But sadly windows mobile comes with a very rudimentary kind of locking mechanism which does none of that job. So here comes Locking utilities like TouchLockPro in picture.

Read the rest of this entry »

All time hit Slide to Unlock got an update & seems to have solved many of its bugs.

S2U2 (Slide2Unlock2) is a simple lock/unlock application which has the iPhone style slide unlocking. It can be used as a screensaver while you don’t use your device. It has a CallerID function (but some devices may not work, so please try it first); S2P control plugin; and volume control.

Read the rest of this entry »

S2U2 (Slide2Unlock2) is a simple lock/unlock windows mobile freeware application which has the iPhone style slide unlocking. It can be used as a screensaver while you don’t use your device. And it’s has a CallerID function (but some devices may not work, so please try it first); S2P control plugin; and volume control.

Prerequisition:
- WM5 Phone or WM6/6.1 Professional devices
- free RAM: at least 1M for QVGA; 4M for VGA

Command Switch of iLock2:
iLock2.exe accepts the following command switches:
-slide to start/invoke S2U2
-nomsg to not to show any message even it closes itself & S2U2
-refresh to reload the registry settings & restart S2U2
-reset to reset the unread counts of SMS, MMS, email & vmail

Read the rest of this entry »

S2U2 (Slide2Unlock2) is a simple lock/unlock windows mobile freeware application which has the iPhone style slide unlocking. It can be used as a screensaver while you don’t use your device. And it’s has a CallerID function (but some devices may not work, so please try it first); S2P control plugin; and volume control.

Prerequisition:
- WM5 Phone or WM6/6.1 Professional devices
- free RAM: at least 1M for QVGA; 4M for VGA

Command Switch of iLock2:
iLock2.exe accepts the following command switches:
-slide to start/invoke S2U2
-nomsg to not to show any message even it closes itself & S2U2
-refresh to reload the registry settings & restart S2U2
-reset to reset the unread counts of SMS, MMS, email & vmail

Read the rest of this entry »

S2U2 (Slide2Unlock2) is a simple lock/unlock pocket pc freeware application which has the iPhone style slide unlocking. It can be used as a screensaver while you don’t use your device. And it’s has a CallerID function (but some devices may not work, so please try it first); S2P control plugin; and volume control.

Prerequisition:
- WM5 Phone or WM6/6.1 Professional devices
- free RAM: at least 1M for QVGA; 4M for VGA

Command Switch of iLock2:
iLock2.exe accepts the following command switches:
-slide to start/invoke S2U2
-nomsg to not to show any message even it closes itself & S2U2
-refresh to reload the registry settings & restart S2U2
-reset to reset the unread counts of SMS, MMS, email & vmail

Read the rest of this entry »

After Koushik Dutta posted the Stylus Sensor API new applications exploiting these features were going to surface @ xda-dev it was just a matter of time and here is one of the first Stylus Sensor application by ZuinigeRijder. Its a lock / unlock utility for devices like HTC Touch Pro / Diamond. Its got a bit of a learning curve than the other lock application.

How to use:
* Choose your “stylus lock mode”, by using the method above
- e.g. if you want to put the TD in your pocket, enable “stylus lock mode”
- e.g. if you have your TD lying on the table, disable “stylus lock mode”
- e.g. you can also use always the “stylus lock mode” when your are fine to take out the stylus for unlocking (you do not need to operate the Power button anymore)

Read the rest of this entry »

S2U2 (Slide2Unlock2) is a simple lock/unlock application which has the iPhone style slide unlocking. It can be used as a screensaver while you don’t use your device. And it’s has a CallerID function (but some devices may not work, so please try it first); S2P control plugin; and volume control.

Command Switch of iLock2:
iLock2.exe accepts the following command switches:
-slide to start/invoke S2U2
-nomsg to not to show any message even it closes itself & S2U2
-refresh to reload the registry settings & restart S2U2
-reset to reset the unread counts of SMS, MMS, email & vmail

Volume Control shortcut
If you need to manually map a key to invoke the new Volume Control, extract the S2U2-VC.LNK & transfer it to your device’s \Windows\Start Menu\Programs\S2U2 (for Non-English device, it varies), then use any key mapping software (some devices have it come along) to map this S2U2-VC to your preferred key.

But it assumes S2U2 is installed at \Program Files\S2U2.

Read the rest of this entry »

S2U2 (Slide2Unlock2) is a simple lock/unlock application which has the iPhone style slide unlocking. It can be used as a screensaver while you don’t use your device. And it’s has a CallerID function (but some devices may not work, so please try it first); S2P control plugin; and volume control.

Command Switch of iLock2:
iLock2.exe accepts the following command switches:
-slide to start/invoke S2U2
-nomsg to not to show any message even it closes itself & S2U2
-refresh to reload the registry settings & restart S2U2
-reset to reset the unread counts of SMS, MMS, email & vmail

Volume Control shortcut
If you need to manually map a key to invoke the new Volume Control, extract the S2U2-VC.LNK & transfer it to your device’s \Windows\Start Menu\Programs\S2U2 (for Non-English device, it varies), then use any key mapping software (some devices have it come along) to map this S2U2-VC to your preferred key.

But it assumes S2U2 is installed at \Program Files\S2U2.

Read the rest of this entry »

S2U2 (Slide2Unlock2) is a simple lock/unlock application which has the iPhone style slide unlocking. It can be used as a screensaver while you don’t use your device. And it’s has a CallerID function (some devices may not work, so please try it first); and S2P control plugin.

Prerequisition:

- WM5 Phone or WM6 Professional devices
- free RAM: at least 1M for QVGA; 3M for VGA

Read the rest of this entry »