nueLED 1.5 - configure LEDS on any HTC device

Its an intermediate LED driver that sits between the led driver and decides which calls to pass through and whether to redirect them or not. Basically, you can now turn off your signal light, make it flash blue instead of green, or whatever you wish. So far it’s been tested on the titan and the kaiser, but should work on any device that uses ALLLEDMGR. nueLED renames allledmgr to LED2: and names itself LED1. Settings are stored in the registry,

-1 means active and
-2 means inactive,
-any other number is a redirect.

To figure out new addresses, use diagnostic mode in settings.

Heres a short tutorial on how to make your signal LED flash blue:
Select the signal led from the list. It has address 8.
Select the option “Redirect to LED Address”, and enter address 32.
Address 32 is the address for the “Bluetooth LED”, on the list.

Soft-Reset your device.
Your signal LED should now be blue!

If you use the cab version and decide to remove it, you need to set

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\AllLEDMgr]
“Index”=dword:1

and perorm a soft reset to re-enable the old led driver. Also delete the [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\nueLED] key.

Stroths has provided a cab file for you to install. A certificate is now included with the cab. You must uninstall any old versions and soft reset for the changes to take effect.

If you find this tool useful, please donate to the developer.

Source : weienterprises.com

nueLED 1.5

HTC Equalizer v1.0.2

HTC hardware equalizer compatible with most (but not all) HTC Pocket PC Phone Edition models. Hardware equalizers have the BIG advantage of not adding any additional CPU usage, unlike software equalizers used by most multimedia players. This is only for headphones and will not improve the quality of the inbuilt speakers.

HOW TO START: After installing to device , use the .lnk file  in the zip archive just copy the file to \Windows\Start Menu\Programs

HTC Equalizer v1.0.2

HTC X-Button

X-Button is a tool developed by HTC that enables the X button to really close programs. Can be setup to end programs by tapping “X” or by tapping and holding “X”. Needs to be setup first through Settings –> System –> X-Button.

You can set exclusion list so those programs will not be closed when u press the x-button.

HTC X-Button 1.5

HTC Audio Manager version 1.02(1017.717)

Simplified audio player with finger friendly interface. A great
replacement of the Windows Media Player. The HTC audio manager also has a good playlist manager. This is present in most of the cooked roms from xda-dev , but if you dont want to flash your ROM and still want to use HTC audio player on the older devices get it here.

HTC Audio Manager 1.02(1017.717)

Program Title: SCLPC++
Recent Version : 0-051
Purpose : A unique Cube Launcher coded in C++ and using the EdgeLib framework library that uses OpenGL also , gives a HTC Touch interface to non Touch WinCE phones
Author : Slither2006
Graphics: PoorlyDuck
Start Date : 5th January, 2008
Source : xda-developers.com

Added in SCLPC++ 0-01

* Current Memory consumption 2-3mb…lol similar to flash…I know it’s steep but the performance is incredible!
* All ORIGINAL animations have been created.
* Stylus Navigation complete
* 2.28mb When minimized.
* press center joy button to quit
* Runs so fast on my 3600i device that I had to set the maximum frames per second to 30….and even that is a bit too fast.
* No Screen tearing on ANY animations.
* Smooth animations ABSOLUTELY SMOOTH
* on a 500mhz INITIAL load time is around 2 seconds.
* on a 500mhz minimize and restore is INSTANT!
* Runs on Windows Mobile 2003, WM05 and WM06 Operating Systems!!!
* Framerate is set to 30fps and can be increased in future versions if slow on particular devices.
* Animations can be customized to whatever you want!
* Menu’s can be customized to whatever you want!
* Locked to Portrait Display orientation. Will run normally even if your phone is in landscape
* It has been tested to work fast on a 201mhz HTC Gene D600 device

Added in SCLPC++ 0-02

* Created 2 Tahoma bitmap fonts in sizes 18pt and 10pt.
* Text can be changed on EVERY MENU!
* Text can be positioned ANYWHERE!!!
* All this is done by editing a file called “TextList.ini”
* All Buttons except contact face buttons work
* Buttons can be configured by editing a file called “ProgramList.ini”

Added in SCLPC++ 0-03

* Fade translucancy effect with the background being your today screen.
* Directional Control (Left & Right Rotate, Down minimizes, Centre/Select button closes)
* When you minimze it remembers and returns you to the last viewed menu!!!! As requested.

Added in SCLPC++ 0-04

* Contact Faces fade in and out when pressed.
* In version 0-03 I noticed i got the D-Pad Left and Right the wrong way, I’ll correct it in this version.
* Call a number INSTANTLY NO DELAY!!!
* Fix Backlight support for devices that go dim when the application starts
* ShellExecuteEx Fixed
* Slow down startup and close animations for viewing pleasure
* Add Contacts function for WM05 & WM06 (NOT WM2003 This must be done by editing the ContactsList.ini file)
* Remove Contacts function for BOTH WM05 & WM06 AND WM2003
* Added Contact press flicker effect
* Added MainScreen Black Font but is a little bold
* Prompted to add picture or not when adding a contact
* If a contact is selected and you choose not to add a Picture then it adds their name and a transparent silhouette image.
* Any Image is resize NOT TO SCALE (that feature will come later)
* And MANY little minor changes and bug fixes.
* For WM05 & WM06 ALL CONTACTS ARE SYNC’D WITH OUTLOOK CONTACTS MOBILE NUMBER ONLY!!!!!

Added in SCLPC++ 0-05

* Re-wrote the whole cube
* Created a 2D/3D Engine
* Uses OpenGL to render a REAL 3D Cube not a fake one
* Fixed BackLight Issue
* Fixed Contact 9 issue
* Added a new “TouchMenu” which appears when a contact face is pressed
* Added Email/SMS/Home/Mobile/Work for each contact
* Added Sliding transition for the “Touch Menu”
* Added Picture scaling for pictures you select as the contacts display picture
* Improved Downswipe sensitivity
* Added the 4th Applications page
* Changed the ProgramList.ini so the 4th Menu buttons can be configured
* Added the SCLPC++ Logo to the top face of the cube (can be changed by user)
* Whole cube is completely skinnable even the fonts.
* Added Transition Fade effects including a crazy rotating cube as it opens and closes
* Added nicer button presses for the Contact faces.

Added in SCLPC++ 0-051

* Fixed the Applications page as its program variables were backwards
* Wrote proper detailed instructions for 0-051
* Swapped the Buttons for the left and right cube rotation
* Fixed the Mobile/Home/Work problem
* Added a prompt to alert you when a contact doesn’t have a certain number. ie “There is No Home number saved for this contact in Outlook”
* Created a nicer looking icon instead of the please donate one
* Increased rotation speed and decreased the time it takes to fade back to the cube after closing a launched program.
* Reduced sensitivity on Minimize cube as it was too sensitive for some devices.

Bugs Found:

* Background Picture bleeding on some applications that open.
* The WHOLE SCLPC++ Folder MUST be placed here : /Application Data/SCLPC++ or adding a contact WILL NOT WORK!
* Because of an absolute path in the cube it must be stored on the device not on a SD card….although you can configure it on the Device then transfer it to your SD card and it has been reported to work this way.

Still Left ToDo:

* Compile this with the Full Edgelib Library!!!

Supported Devices List:

* Wizard G3
* Hermes
* Trinity / HTC 3600
* HTC 3600i (my device) WM6
* Kaiser with WM6.1
* Atom O2 Flame WM5 & WM6
* xv6700 WM6.1
* xv6800 WM6.1
* Kaiser WM6
* If it works on your device 100% then let the dev know so he can narrow down the bugs for other users.

Problems with these Devices:

* LG so far
* All VGA devices
* All 240×240 devices

SCLPC++ 0-05

Install instructions are provided in the zip file

HTC’s TouchFLO UI was great because it was one of the first “skin Windows Mobile to make it usable” applications—even if it isn’t quite as good as PointUI. This supposed TouchFlo 2.0 upgrade looks much improved, even if it is still early in the development stage. If you’re feeling brave you can actually try and install it on your own phone and give it a shot. We hope this new version covers up more of the Windows Mobile UI than the original, which was basically just a shortcut launcher system to get you into the ugly, bloody guts of the phone.

The interface looks like a part of the Manila UI that was posted a few days go. Check it out here : Manila Interface